Fire Weather Definition, Conditions, Watches, Warnings

The types of weather that create favorable conditions for the start and spread of wildfires are collectively referred to  as  fire weather. Conditions Warm Temperatures: Air temperature has a direct influence on fire behavior. The warmer the air temperature, the more the fuel sources (leaves, grass, branches, logs, etc.) are already heated by the sun, and the less additional heat is needed to ignite a spark.Winds: Theres a reason for the expression Dont fan the flames. Wind increases the supply of oxygen which causes a fire to burn hotter. As it blows over a surface, it also removes moisture/increases evaporation, which dries the fuel source out even more. Finally, wind can increase the spread of fire by blowing hot embers to new areas outside of the parent fire.Low Relative Humidity: Recall that relative humidity tells us how much moisture (in the form of water vapor) is in the air versus how much moisture the air could hold at its current temperature. The lower the RH, the quicker the moisture will leave a fuel source and the more readily a fire will start and burn.Instability: Atmospheric stability describes the atmospheres tend ency to either resist or encourage vertical motion. If the atmosphere is unstable, air easily moves upward. This type of environment increases fire activity because the vertical movement and mixing of air (updrafts) and increases the potential for gusty surface winds. Other weather conditions and events that can impact fires, and even cause them, include lack of recent rainfall, drought conditions, dry thunderstorms, and lightning strikes. Fire Weather Watches Warnings While the above-listed conditions are notorious for fueling  fires, the National Weather Service (NWS) will not issue official warnings until certain  threshold values—called  red flag criteria, or critical fire weather conditions—are  forecast to  occur. While red flag criteria may differ from state to state, they usually include relative humidity values of  20% or less and winds of 20 mph (32 km/h) or higher.   Once a forecast suggests red flag criteria are likely  to be met, the NOAA National Weather Service then  issues one of two products to warn the public and area management officials of the potential threat to life and property should fire ignition occur: a Fire Weather Watch or a Red Flag Warning. A Fire Weather Watch is issued 24 to 48 hours before the onset of red flag criteria, whereas a Red Flag Warning is issued when red flag criteria are already occurring or will occur within the next 24 hours or less. On days when one of these alerts is  in effect, you should avoid outdoor burning activities, such as:   Burning trash, leaves, brush, and yard trimmingsBurning outdoor luminary candles (lanterns, tiki torches, etc.)Setting off fireworksDiscarding cigarettes outdoorsBuilding large campfires and leaving these unattended.   Incident Meteorologists In addition to issuing fire weather alerts, the National Weather Service deploys specially trained forecasters to locations where large  wildfires are active. Called Incident Meteorologists, or IMETs, these meteorologists  provide on-site weather support (including weather monitoring and daily fire weather briefings) to the command staff, firefighters,  and other incident personnel. Latest Fire Weather Data The most up-to-date fire weather information is  available through these sources:   NOAAs Storm Prediction Center Fire Weather Forecasts  highlights  areas in the contiguous U.S. where a significant threat of wildfires exists during the next 8 daysNWS Red Flag Warning Products lists U.S. locations with current active  red flag watches and warningsInciWeb is a log of national wildfires that includes information such as fire type and total acres burned